Samples provided for testing must be collected from materials already supplied to an active construction site or project. Required sample size: 320 mm × 320 mm.
The sample (s) must be without the protective film; if the sample cut out from site has the protective film, it should be taken off before submission
The sample(s) must be adequately cleaned prior to submission to ensure test results are not affected.
A single individual may submit multiple samples for testing and may make multiple submissions over time
An Aludecor representative may contact you to obtain additional details required for official records.
Samples must be submitted at the nearest Aludecor dealer point. Samples submitted for testing will not be returned.
Testing will be conducted free of charge at Aludecor’s fully equipped laboratories, including the NABL-accredited FR lab.
To comply with NABL’s confidentiality and impartiality requirements, direct interaction between the customer and lab analysts during virtual testing will not be permitted. The identity of the lab analysts will remain confidential and will not be disclosed. The brand name will also not be divulged to the lab analysts.
Test reports (soft copies) will be provided to the customer by the Aludecor customer care team within the stipulated time notified to the customer at the time of collecting the details. This report shall always remain confidential and will not be shared with anyone except the owner of the sample.
Test reports shared will only contain test values and observations as per the standard protocol. There won’t be any interpretation or opinion.
P.S.: The information collected will be used solely for legitimate business purposes, including professional communication and interactions with customers. It will not be shared, sold, or used for any other purpose beyond what is necessary to deliver our services or enhance customer experience, in compliance with applicable data protection and privacy regulations.
DISCLAIMER
The ACP testing initiative facilitated by Aludecor is a voluntary, informational service intended to support informed decision-making by industry stakeholders.
Fire-Performance ACP testing is conducted at NABL-accredited facilities facilitated through Aludecor’s R&D and Quality systems as per approved scope.
Non-FR ACP samples undergo performance and quality evaluation at Aludecor-facilitated R&D and testing centres using defined internal protocols and relevant test methods. These evaluations do not constitute regulatory approval, certification, or fire-safety validation.
Test reports reflect observations and results specific to the submitted sample only, under stated test conditions. Results should not be generalised, compared across brands, or interpreted beyond the tested parameters.
Aludecor does not publish, rank, endorse, or interpret test outcomes, and does not comment on brand suitability or comparative performance.
To protect confidentiality and impartiality, test coordination and reports are shared only with the sample owner or their authorised representative, unless explicit written consent is provided.
This initiative is not a comparison platform, not an industry audit, and not a regulatory substitute, and participation does not imply endorsement or disapproval of any brand or product.
